Peanut Butter Butterscotch Fudge Recipe (2024)

FAQs

What causes peanut butter fudge not to harden? ›

Peanut butter fudge may fail to harden if it hasn't been refrigerated long enough or if not enough powdered sugar was used. Ensure that you follow the recommended refrigeration time and accurately measure the powdered sugar to achieve the perfect consistency.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

Let the mixture cool before beating. The temperature at this point should be 43°C to 45°C (110°F to 113°F). The fudge should be warm but not burning hot. Stop beating when the surface of the mixture starts to look dull or matte.

You didn't cook it long enough. Fudge needs to be heated to the "soft ball" stage. It is salvageable, but you'd have to be very careful of sugar crystallization. If you make a mistake you'll wind up with a grainy mess.

Can you over whisk fudge? ›

The longer you beat once it starts to thicken then the more crumbly the final fudge will be. If you like it smooth - beat it only until comes away from the sides of the pan and sticks well to the spoon. Press into the prepared tin and leave to cool and set before cutting into squares.

After cooking, the mixture must cool before being stirred in order to make it crystallize. This cooling period is essential: this is what determines the size of sugar crystals which, remember, should be as tiny as possible. Ideally, the syrup should cool to a temperature of around 43 to 50 °C (110 to 122 °F).

The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft.

In the oven - wrap the fudge in foil with a tiny bit of water, perhaps 2-3 teaspoons and bake at a low temperature (120-140C or 248-284F) for 10-20 minutes, or until the fudge no longer feels/looks dried out.

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.